The Gas Safety Burner, The Bunsen Burner
The perfected Bunsen burner
- Made of stainless steel and glass
- Digital display of burn-time
- Digital status display
- Up to 80% gas savings
- UV-resistant, may be flame-sterilized
- Adustable in the continous mode for up to 99 minutes
- For laboratory and mobile operation
- Robust and highly reliable
Acvivate by moving your hand in front of the display or by using the foot-switch:
Sensor operation
The user may individually set the sensitivity of the IR-Sensor (touch free) in order to activate the burner with the movement of a hand or the tip of a pipette/inoculating loop. The gas supply automatically cuts off when the present time randing from 1 sec to 99 min has elapsed and the flame stops.
Sensor distance (0-80mm)
The distance is digitally and continously adjustable in 32 individual steps.
Foot-switch, mode 1
Gas supply and electronic ignition are activated automatically. The flame only comes on when pressing the foot-switch and is thereby permanently under control. As soon as the foot-switch is released, the gas supply is cut off and the flame stops immediately.
Foot-switch, mode 2
The flame comes on when pressing the foot-switch once and stops after pressing the foot-switch again or the preset time has elapsed.
Safety
Flame monitoring
Shold the flame inadvertently extinguish, a safety feature will provide for automatic re-ignition without interupting your work.
Ignition monitoring
The gas supply automatically cuts off as soon as the automatic re-ignition fails for more than 10 seconds to produce a flame. The digital display shows the corresponding fault report.
Continuous flame supervision
Should the flame extinguish due to spilled liquids and cannot be re-ignited, the gas supply automatically cuts off. The digital display shows the corresponding fault report.
Precisely adjustable burn-time
Digital and exact to the second (1 sec...99 min), safety cut-off after 99 mins. Turning the malfunction control to the left hand side decreases the burn-time, turning to the right causes an increase. The present time is stored until the setting is changed again (memory function).